Automotive Locksmith

24/7 mobile automotive locksmith service

CALL: (203) 649-1262

Residential Locksmith

24/7 mobile residential locksmith service

CALL: (203) 649-1262

Commercial Locksmith

24/7 mobile commercial locksmith service

CALL: (203) 649-1262

Emergency Locksmith

24/7 mobile emergency locksmith service

CALL: (203) 649-1262

Common Ignition Problems

Most people will admit that driving is a luxury. They would likely say this because there are other ways of getting around without driving yourself. There is public transportation and all sorts of rideshare services. However, the only problem with these is that you have to wait around for someone to pick you up and drop you off. There is nothing like the freedom of being able to get into your own vehicle and going wherever you want. While driving certainly has its advantages, there are also some drawbacks. Since vehicles are mechanical, you have to anticipate problems from time to time. If you are not caring for it by getting routine maintenance performed, you will likely have more problems than someone who is having routine maintenance performed. One of the problems that a motorist might experience might involve their ignition. You may have fallen victim to this. Have you ever tried to start your car but it wouldn’t start? If you have, it was likely due to a problem with your ignition. The first thing that you might think is just how expensive the repairs will be. However, if you call on a locksmith, such as Shelton CT Locksmith, you’ll be able to receive the help you need at an affordable rate.

Your ignition is the source of power for your spark plugs that produce combustion in the vehicle’s engine. When the ignition switch is turned on then it powers a coil that gives it the necessary power for the spark plugs to work.

There are some car issues that are pretty common. Here is a list of the most common problems that you might experience with your car’s ignition:

Faulty Switch – Whenever the ignition system is triggered and the vehicle still won’t start, it is usually traced back to the ignition switch. The best way to handle such a matter is to have the switch replaced.
Dead Battery – You will notice that whenever someone is called out to check out a problem that involves a vehicle not starting, the first thing they will do is lift the hood to check the battery. That is because it could be due to alternator failure. Addressing the problem with the alternator and then recharging the batter will usually resolve the problem.
Old or Worn Spark Plugs – If you have worn out spark plugs, they can’t be repaired they must be replaced.

The aforementioned are basically issues related to your ignition that a mechanic would have to address. However, when you experience a problem with removing the key from the ignition or inserting a key into the ignition, this is usually something that you can resolve on your own, if you know what to do.

What to do when your vehicle is in the ON position:

Check the gears – When the gear is not in park, the key will not turn inside the ignition. This means that it will be impossible for you to start your vehicle.

Look at your dashboard – Sometimes you could have your gear in the park position but it really isn’t. To ensure that it is, check to see where it is according to the dashboard.

Loosen up the key – Gently wiggle the key back and forth while in the ignition, so as to loosen it up. Your intentions should be for the key to easily slide out without too much force. If you use too much force, you could break the key off in the ignition. This would only make the problem worse.

What to do when your vehicle is in the OFF position:

Take note of the key position – If you have an old key, it may not enter the ignition properly. If your key keeps getting stuck, don’t continue using the key replace it with another key.

Check your battery – While this may sound logical to many people, there are some motorist who don’t even think about doing this. However, this is usually the first thing that an auto mechanic will do upon arriving to your location to help with the removal of your key. If they find that you have a dead battery, your car won’t start.

Loosen up the key – Gently wiggle your car key so that you can eventually wrangle it from the ignition without too much force. It isn’t uncommon for someone who is in a hurry to snatch the key out of the ignition. Avoid the headache by just taking your time to loosen up the key until the key smoothly comes out.

We offer you these suggestions because obviously, they work. Rather than spending money unnecessarily, you can actually take matters into your own hands. However, it is up to you how you feel most comfortable removing your key from the ignition. The key to properly removing the key without incident is by making sure you don’t panic. If you do not panic then you are more likely able to react with a clear mind. There are some people who don’t have a problem attempting these things on their own, however, there are also some motorists who can’t be bothered. This means they would rather call on someone else to handle the problem rather than risking the possibility of the key completely breaking off in the ignition. If you are one of these types of motorists, feel free to contact a local Shelton, CT locksmith to assist you further.

Relying on the services of a locksmith when you are experiencing trouble with your ignition may not seem logical. Like most people, you likely assume that you have to contact an auto mechanic. However, this is not true. A locksmith is well aware of the functionality of the car’s ignition and the many problems that motorists experience with them. Utilizing the services of a locksmith means that they come to you and you don’t have to have your vehicle towed. It also means that you’ll pay less to have the problem resolved, as a locksmith offers reasonable rates to help with this type of problem.